Embodied Carbon Data for Timber Products

Embodied Carbon Data for Timber Products

Date Published

4 March 2026

Document Type

Author

TDUK

Free Resource (Log-in Required)
To download this resource simply log-in or create an account – for free – in just a few clicks.

Summary

This is an updated version of the 2025 Embodied Carbon Data for Timber Products.

All materials have an embodied carbon value, which reflects the emissions from all stages of production, use and end of life. This data is normally captured in the form of a verified EPD (Environmental Product Declaration). This Timber Knowledge Sheet provides weighted average upfront A1-A4 and end-of-life C1-C4 biogenic and embodied carbon data for a number of common timber products, and outlines the methodology used to calculate them.

Previous versions of this document can be downloaded below:

Key Information

Read this Knowledge Sheet to find out the weighted average upfront A1-A4 and end-of-life C1-C4 biogenic and embodied carbon data for timber products, including:

  • Sawn softwoods
  • CLT (cross-laminated timber)
  • LVL (laminated veneer lumber)
  • Glulam (glue-laminated timber)
  • I-joists
  • Softwood plywood
  • Hardwood plywood
  • OSB (oriented strand board)
  • MDF (medium-density fibreboard)
  • Chipboard
  • Wood fibre insulation

The knowledge sheet uses A1-A3 biogenic and embodied carbon data from verified EPDs, as well as information on UK production and imports from TDUK and Forest Research, to calculate a weighted average A1-A3 embodied carbon figure, including and excluding biogenic carbon for the above products.

It also uses the data from the EPDs to determine a realistic scenario for the transport of these products to a nominal UK construction site to calculate a realistic A4 embodied carbon figure, and to calculate the end-of-life C1-C4 embodied carbon figure.

The data has been verified in accordance with CEN/TR 15941:2010 and the verification report can be found here. A PDF of the data sources and figures can be found here.